Flow rate:
Minimum, Normal, Maximum (large enough for economy of scale for RTOs or carbon concentrators?)
VOCs or composition:
% of each VOC or combustible (high concentration produces plenty of heat so direct TO may be best.)
Oxygen concentration:
% O2 (impacts burner selection and operation.)
Inert concentration:
Inclusion of lots of H2O or CO2 impacts design and burner selection
Temperature:
Slightly over ambient temperature could mean carbon cannot adsorb while much higher temperatures mean less auxiliary fuel required and easier to destroy but accommodations needed for high gas temperature.
Particulate presence:
High Particulate must be dealt with by TO design or auxiliary equipment addition
Acid production/presence:
Acid presence impacts TO design and addition of auxiliary equipment
Auxiliary fuel available:
Type of fuel to be fired impacts burner and TO design
N compound presence:
Nitrogen compounds impact TO design because N compounds can produce high levels of NOx.
What to consider in a thermal oxidizer design
Pittsburgh Office
How can we help?
Air Pollution Control Solutions
Nacah Tech LLC
37 McMurray Rd Suite #203
Pittsburgh, PA 15241
(412) 833-0687
8:00 AM - 6:00 PM EDT Weekdays
This privacy policy discloses the privacy practices for www.nacahtech.com. This privacy policy applies solely to information collected by this web site. It will notify you of the following:
1. What personally identifiable information is collected from you through the web site, how it is
used and with whom it may be shared.
2. What choices are available to you regarding the use of your data.
3. The security procedures in place to protect the misuse of your information.
4. How you can correct any inaccuracies in the information.
Information Collection, Use, and Sharing
We are the sole owners of the information collected on this site. We only have access to/collect information that you voluntarily give us via email or other direct contact from you. We will not sell or rent this information to anyone.
We will use your information to respond to you, regarding the reason you contacted us. We will not share your information with any third party outside of our organization, other than as necessary. Unless you ask us not to, we may contact you via email in the future to tell you about specials, new products or services, or changes to this privacy policy.
Your Access to and Control Over Information
You may opt out of any future contacts from us at any time. You can do the following at any time by
contacting us via the email address or phone number given on our website:
• See what data we have about you, if any.
• Change/correct any data we have about you.
• Have us delete any data we have about you.
• Express any concern you have about our use of your data.
Security
We take precautions to protect your information. When you submit sensitive information via the
website, your information is protected both online and offline. We also protect your information offline. Only employees who need the information to perform a specific job (for example, billing or customer service) are granted access to personally identifiable information. The computers/servers in which we store personally identifiable information are kept in a
secure environment.
Updates
Our Privacy Policy may change from time to time and all updates will be posted on this page.
If you feel that we are not abiding by this privacy policy, you should contact us immediately
via telephone at (412) 833-0687 or via email.